never seen before...
but maybe it is something like a phono preamp? "PU" for PickUp?
The 50/75 switch could be for oldschool DIN 50µs encoding or modern RIAA 75µs treble EQ.
Don't know what the knob does, more pictures could maybe clarify what these units do..
Lukas
Search found 354 matches
- Fri Sep 03, 2021 6:42 am
- Forum: Secrets of the Lathe Trolls
- Topic: Gear ID
- Replies: 1
- Views: 787
- Sun Aug 29, 2021 9:02 am
- Forum: Secrets of the Lathe Trolls
- Topic: What is everyone using to offset their preview signal in a DAW?
- Replies: 17
- Views: 3200
Re: What is everyone using to offset their preview signal in a DAW?
Hey Discomo!
I think people here are discussing preview signals for automatic variable pitch controllers.
That's not something you find on a stock Vinylrecorder/Presto/etc...so don't worry about it
Lukas
I think people here are discussing preview signals for automatic variable pitch controllers.
That's not something you find on a stock Vinylrecorder/Presto/etc...so don't worry about it
Lukas
- Fri Aug 27, 2021 3:43 am
- Forum: Secrets of the Lathe Trolls
- Topic: tell me your experiences with the elliptical equaliser
- Replies: 39
- Views: 8708
Re: tell me your experiences with the elliptical equaliser
so there must be a default hpf in the cutting system, the lowest you can cut. what are the numbers on that today (Hz, filter order)? The default hpf in cutting systems may be different from system to system. Some have it maybe at 20Hz or so, others may be DC coupled... But what has not changed in t...
- Tue Aug 24, 2021 12:34 pm
- Forum: Secrets of the Lathe Trolls
- Topic: Disappearing grooves mid way through cutting lacqures??
- Replies: 10
- Views: 2094
Re: Disappearing grooves mid way through cutting lacqures??
I mean is that the groove depth dramatically increases and then decreases for a couple of rotations Funky! it would happen for just one single rotation Like one single 3mil wide strip of the blank is bad and everything else is fine? That's pretty narrow for mechanical thing! Maybe good old VMS80 (t...
- Mon Aug 23, 2021 8:47 am
- Forum: Secrets of the Lathe Trolls
- Topic: tell me your experiences with the elliptical equaliser
- Replies: 39
- Views: 8708
Re: tell me your experiences with the elliptical equaliser
an elliptical equaliser is something that vinyl cutters rather avoid using. ...and produce records that skip/do not track on playback?? I'm not sure about that... what are really the pain/regrets when you have to use an elliptical equaliser? it will alter the stereo image (because that's what it sh...
- Fri Jun 18, 2021 9:55 am
- Forum: Vinyl Mastering, Lacquer cutting, Pro's and others
- Topic: The Adamant Micro-Point stylus NSH-2S
- Replies: 2
- Views: 2779
Re: The Adamant Micro-Point stylus NSH-2S
Besides the color thing is there something special about them?
Or are you afraid that you got an old stock Transco in a Adamant Box?
Or are you afraid that you got an old stock Transco in a Adamant Box?
- Fri Jun 18, 2021 9:51 am
- Forum: Classifieds & tip-offs
- Topic: FS: Vinylrecorder
- Replies: 7
- Views: 4332
Re: FS: Vinylrecorder
This unit has found a new home - SOLD!
- Mon Jun 07, 2021 5:21 am
- Forum: Secrets of the Lathe Trolls
- Topic: Mystery Lyrec lathe
- Replies: 5
- Views: 5310
Re: Mystery Lyrec lathe
Can it be that one of the motors is a little shorter? Something ike 2/3 of the other? If that is the case then you have one motor for 33/78 RPM and the other is the classic SM8/3 with 33/45/78 RPM speed. No starter motor attached. The mechanics look really nice, classic lyrec! The "electronics" I ca...
- Mon May 17, 2021 8:02 am
- Forum: Experimenters' & Innovators' forum
- Topic: Cutting records on a cnc mill
- Replies: 19
- Views: 8608
Re: Cutting records on a cnc mill
Interesting stuff - is there a sound or video of the actual cut records? Regarding your questions: - there's not to much going on on this site regarding new technology as most people here are doing it the oldschool (100+ years) way... - maybe start with some plastic? I guess milling a solid hunk of ...
- Sun May 02, 2021 4:39 pm
- Forum: Secrets of the Lathe Trolls
- Topic: Mystery Lyrec lathe
- Replies: 5
- Views: 5310
Re: Mystery Lyrec lathe
Yeah, heavy metal!
Looks like a more stationary version of the SV2 "mobile" recorder.
Also cool finding a bunch of motors and turntables!
BTW - are you somewhere in the north?
Cheers
Lukas
Looks like a more stationary version of the SV2 "mobile" recorder.
Also cool finding a bunch of motors and turntables!
BTW - are you somewhere in the north?
Cheers
Lukas
- Sat Apr 17, 2021 4:32 am
- Forum: Classifieds & tip-offs
- Topic: FS: Vinylrecorder
- Replies: 7
- Views: 4332
Re: FS: Vinylrecorder
As said it's not my unit and I don't have tons of experience on VR.
I just quickly put it together and did some test cuts to confirm it is in working condition.
If the unit is picked up locally I can show and give some introduction to record cutting.
I just quickly put it together and did some test cuts to confirm it is in working condition.
If the unit is picked up locally I can show and give some introduction to record cutting.
- Thu Apr 15, 2021 6:47 am
- Forum: Newbie Forum
- Topic: Try to find a T560 or similar
- Replies: 3
- Views: 1445
- Thu Apr 15, 2021 5:06 am
- Forum: Circuits, schematics and manuals
- Topic: A slightly weird limiter circuit, any chance of some schematic review?
- Replies: 2
- Views: 5399
Re: A slightly weird limiter circuit, any chance of some schematic review?
Hey Mr Engineer :-) Interesting design! Reminds me of some classic limiters for just that purpose, not with THAT chip but quadrant multipiers and stuff. A split band limiter? I also once started a very similair thing from a commercial unit having the same architecture (VCA chip for subtraction "gain...
- Wed Apr 14, 2021 8:00 am
- Forum: Classifieds & tip-offs
- Topic: FS: Vinylrecorder
- Replies: 7
- Views: 4332
FS: Vinylrecorder
For sale - used Vinylrecorder Includes: - Overhead Mechanics - Stereo Cutterhead - 19" Main Controller - 19" Optimizer unit - PSU - Acessoires for Stylus change, Disc clamp etc... - Power Amp (SoundLab G097F) - some used diamond styli, a couple of blanks NOT included: - Technics 1210 - Microscope - ...
- Wed Apr 14, 2021 5:57 am
- Forum: Classifieds & tip-offs
- Topic: Stereo dynamic cutting head FOR SALE
- Replies: 29
- Views: 6845
Re: Stereo dynamic cutting head FOR SALE
Ouch, Styli don't like being bitten...imo
- Sat Apr 10, 2021 9:23 am
- Forum: Secrets of the Lathe Trolls
- Topic: MS52H and AM131 suspension questions
- Replies: 2
- Views: 542
Re: MS52H and AM131 suspension questions
The suspension is good for most european cutters that have the same back "sliding mount" - Caruso can be mounted if you want to... The grease in the MS52h is specified to be lasting "forever", so I would not mess around before some simple testcuts. The MS52h may have some limitation but on the other...
- Sat Apr 10, 2021 9:15 am
- Forum: Newbie Forum
- Topic: Neumann AM131 in a newbie's hands!
- Replies: 5
- Views: 1459
Re: Neumann AM131 in a newbie's hands!
BTW - cool studio!
- Sat Apr 10, 2021 9:14 am
- Forum: Newbie Forum
- Topic: Neumann AM131 in a newbie's hands!
- Replies: 5
- Views: 1459
Re: Neumann AM131 in a newbie's hands!
Great find! I have some documents about the AM131, feel free to contact if you need something specific! Should not be too hard to get this one going - mostly mechanical stuff that if not bent or rusty just needs a clean & oil job and then it should be good again! MS52h needles are rare (as you see i...
- Thu Apr 01, 2021 8:27 am
- Forum: Classifieds & tip-offs
- Topic: very limited edition. bijoux series
- Replies: 5
- Views: 1414
Re: very limited edition. bijoux series
Does it fit onto my crosley turntable?
I have a very good crosley, upgraded with solid gold platter!
Sound is very pure!
I have a very good crosley, upgraded with solid gold platter!
Sound is very pure!
- Sun Mar 21, 2021 5:03 am
- Forum: Secrets of the Lathe Trolls
- Topic: Search for a feedscrew and turntable bearings for old neuman
- Replies: 17
- Views: 5151
Re: serch for a fedscruw and a turntable berings to a neuman
Hi! No, not from Sweden. A snowy country more in the south... How do you think Ortofon made heads for Lyrec? A couple hours browsing my computer I found that other pic again hehe Guess it is from a museum in Sweden, same custom dial-knob on the right hand side of the machine (pitch adjustement?). Th...