The Secret Society of Lathe Trolls

hi i dont want to have a debate on how hot places get but i ve have my VR mostly in my back shed and in Australia it gets 46/8c easy and in a week straight too and my shed has got to 51c before as i looked on my heat gun many times...my point is that this issue has not happend to me well it has but ...

Thankyouthankyou

WOw thankyou mr Dixon and to hear that from you is better than Guinness or Grammy moment ..thankyouthankyou

in this vid the half inch record had to be raised a bit to get inside on the cut and on playback i had to bend the stylus holder to its far right to meet the grooves in line..both cuts are 1.5mm thick. and yes it sounds horrible ..on the VR eq i had to put it all down to do it.. I hate the sound of ...

I was reluctant to put up my 1inch cuts as video and audio but hey life is too short block your ears or turn down volume... once i get new diamonds ill post 2mins on one side thats my aim with perfect sound.. its getting popular for some reason,.but kinda hard doing 100 at a time.. https://www.youtu...

Hi guys i found another small snip of some old footage of the broadcast of Neville Chamberlain,s 1939 speech from inside BBC.. from memory it was recorded on a cylinder at Downing st and in this footage you can see 2x 8ns and transcription turntable playing back the speech that was cut onto a record...

Presto MS16b (like mine) in action in this 2sec video at the end of this great doco, i found this while i was remembering my uncle who fought in Crete and both my Papous who fought in El alimain and Tobruk .. its a great watch on this ANZAC day ,it even has Rahl Dahl in it saying that his bomber com...

Thankyou mr Robinson. You are by far the most highest of lathe trolls..

yes correct ..from memory Fritz said it was added for reel to reel implementation....all that plug does is it disengages from the controller and the motor runs at its own rpm..but if souri has made one ? then get it .

yes but u need to trigger it externaly like a drumachine trigger 1.5v with a program..so eg; if you want to put 3 songs on one side there will be 2 triggers on your DAW...you cannot do lead in or out..do u have this rca mono plug on the back?

Yes..on the back of the unit that has the groove distant knob there is an rca female and a rca male plug mono.when u take this out it goes at top speed when u put it back in it turns slow again and in time with the groove knob...so u need to midi /cv with software to trigger that rca plug so it make...

ub40 hahahahahaha i meant to say wd40...

my audio cutting out was the same problem i had years ago as a dj..i would spray it out with ub40..when it did the same on my vr mixer i took the face plate off and sprayed ipa in the vertical right fader and it went away.it came back and i did it again mind you my studio is in a hot/dusty ozzy back...

sorry isopropyl alcohol

isolpropal acid...and the shity mixer is good 13years mine is still going

right on radar. ..i found my problem in the right channel in my mixer ,just cleaned it up with IPA and it went away...assuming u still have the mixer?..

sounds like a worn diamond to me ..and blasting blank cuts louder has nothing to do with vacum volume...maybe if i had mr tuffnills "11" amp from spinal tap

ive always wondered why the rumble in my prestos and the vacum on my vr never comes out on recordings

amazing.... pot calling the kettle black

and the bronze well bush too with loose or embeded steel ball