The Secret Society of Lathe Trolls

Start here: https://www.lathetrolls.com/viewtopic.php?f=22&t=8328&hilit=newbie+starter+guide

European Record Cutter Gathering - Thessaloniki, Greece July 15-17th, 2023! We are partnering with Agnew Analog in Thessaloniki, Greece, to coordinate the first ever Greek Lathecation! We are still working on the details, but if you are interested in being kept up to date, just watch this FB group. ...

I'd be interested to see your suction system. 6Ns are difficult to get the suction tube behind the stylus.

Start here! https://www.lathetrolls.com/viewtopic.php?f=22&t=8328

I had a similar issue the other week where my grooves were slowly fading away into the centre. With my 6n if I manage to get something to play all the way through I don’t try to touch too much I feel like soon as a change too much it will take me days to get back to that point. It’s hard to explain...

Try our embossing styli on polycarbonate. We get a pretty low noise floor when weight and angle are correct. https://www.recordlatheparts.com/collections/styli

Send me a pic of the one you are replacing. I have a few ROK motors.

I sell both 6 to a page 3.5" labels and 4 to a page 4" label https://www.recordlatheparts.com/collections/record-supplies/products/printable-center-labels

You might also consider coming to one of my www.lathecutcamp.com. There is no better way to understand all the different mechanical nuances of these machines than to actually put your hands on one and use it. I have quite a few different types of machines in the studio and go into the different desi...

Reach out to Cash Carter. He is intimately familiar with Warmtones and does independent consulting for record pressing plants. He does it for a living and requires a reasonable rate for his time and expertise, but he is extremely knowledgeable. You may have to talk the pressing plant into investing ...

That's really interesting. NEver seen one like that. THat's a great price for someone looking for a project.

Messaged you

If you haven't already found this, start here before you start blowing through styli and blanks. THe one that is in there is most likely an old steel stylus and totally worthless.

https://www.lathetrolls.com/viewtopic.php?t=8328

yo! I got stuck with one of those beautiful art deco Federal Recorders, but the feedscrew was inside out, making it relatively useless. It was also 78 only. I am using one of Jed's external belt drive motors, so speed was taken care of, but that feedscrew was a serious issue. So I sent it to my mach...

What do you mean by “landsurfing” exactly? Playback stylus skating? Or riding between horns on the side of the groove? What embossing styli are you using?

LennonG wrote: ↑

Tue Jan 31, 2023 12:02 pm

Any update on blank or different colour blanqs?

If you are embossing, I sell White, Black, Smokey Grey and Translucent Blue polycarb. They are no good for diamond cutting, though.

Jed in Poland makes a lot of mods that would help with modding a ROK for diamond cutting, and I sell those mods along with being a US distributor for TKV stereo cutterheads. a ROK is probably the least expensive lathe that will handle diamond cutting for stereo. So, if that is your absolute goal and...

I have 2 Neumann styli, but both have not been tested and probably need resharpening and rewiring. But can let go cheap. Regards, Would those be presto compatible? They are not. Agnew Analog makes an adapter i think, but there is nobody that i know of that resharpens cutting styli back to cutting s...

These are just picture discs. Are you looking for someone to design a zoetrope for you? Or do you have one and just need lathe cuts?

Most people emboss onto cds because they are polycarbonate. My guess is that the polycarb would wear down yr cutting diamond fairly quickly. But you could potentially turn an old, slightly worn diamond around 180 degrees and emboss with it. Tragwag would probably know.