The Secret Society of Lathe Trolls

Hello there! I am selling some alpha toolex presses, need restauration. more or less missing parts, contact me for further details. only to experienced buyers. (hydraulics, pneumatics, electric etc.) the machines need a lot of time & money, to run again, compareable to a barn find of an old car. che...

Sorry, I have to stop this offer at the moment. My contract does not allow me, to sell such things.
I have to check my contract again, to be 100% sure. Sorry for now!

Sorry, I have to stop this offer at the moment. My contract does not allow me, to sell such things.
I have to check my contract again, to be 100% sure. Sorry for now!

small compact table elektroplating system, one cell: key features: -14" or 10" plating possible, mostly all sizes under 14" -extremly small & compact, only 50 liter fluid needed -easy setup and configuration, easy maintainance -max. 60A plating current, approx. 3 hours for one stamper -low temperatu...

small compact table elektroplating system, one cell: key features: -14" or 10" plating possible, mostly all sizes under 14" -extremly small & compact, only 50 liter fluid needed -easy setup and configuration, easy maintainance -max. 60A plating current, approx. 3 hours for one stamper -low temperatu...

the cuts seems to have lot of wow & flutter, or is this from a pedal effect?
Has the motor enough power to cut in plastic discs?
A really neat machine!

got it thanks! what a motor, has 28kg torque!

It is a good thing, to have a strong suction at the turntable, to hold also bended discs in place.
two different pumps, one for chip, on for the turntable, is also an option.

I am looking for a scan of SP-02 infos, pdf whatever.
I am working on a list of possible motors for lathes, this one is missing.
I mainly need the specs, but schematics would be nice, a lot of wrong infos in the net...
thanks in advance!
Andreas

I also just bought one. How is the sound (compared to a pro-cut) and max.
volume? I hope, it also works with plastic blanks...

newbuilt germany has built a 7inch dinker, mostly like the dinker
at the toolex 702 automatic press.
I saw a video of it, works fine. ask erwin

https://newbilt-machinery.com/machines-equipment/

you can cut masters with the T560. mount a saphyr, put a laquerdisc on it and go! the thing is, the head has no or no pro feedback, so frequency response is not as good as on SX-74-like heads, SC-99, caruso, ortofon etc. especially bass is not as solid as with the feedback heads. you can do excessiv...

finally sold!

yes, it is still there. We are located in germany, near munich.

Hi! Thanks for the pics, never seen a Vestax inside. What I see at the pictures: -middle section, abothe the motor looks like the power amp, with the IC, mounted to the housing for cooling. -the big aluminium cooler on the right side looks like the power regulator for the platter motor. -the pcb, mi...

completly restored, please send email address for PDF with infos/photos.
thank you!

MY45 is selling a finebuilt record press, hydraulic cylinder was restored by newbuilt, they did some pressings on the machine. Mostly all parts are disassembled then, also the "finebuilt" logo was scrubbed off. You will need: book moulds, pneumatik parts that drive the mould in/out, manual operation...

MY45 is selling a finebuilt record press, hydraulic cylinder was restored by newbuilt, they did some pressings on the machine. Mostly all parts are disassembled then, also the "finebuilt" logo was scrubbed off. You will need: book moulds, pneumatik parts that drive the mould in/out, manual operation...

Hello to the toolex users here :) I am looking for a gearbox for the alpha toolex extruder. I was wondering, if the gearboxes are still available, and if the gearbox is a "standard" gearbox, or a special part, made for alpha toolex back in the 70ies/80ies ? For example, the extruder gear for the 7in...

MY45 is looking for 10" laquers, they are out of stock
since months (long before the Apollo desaster), and we have
special 10" galvano...
thanks! andi/my45