Search found 25 matches
- Tue Jan 21, 2014 3:25 pm
- Forum: Vinyl Mastering, Lacquer cutting, Pro's and others
- Topic: adamant stylus which type?
- Replies: 1
- Views: 900
Re: adamant stylus which type?
cone is
- Tue Jan 21, 2014 3:15 pm
- Forum: Experimenters' & Innovators' forum
- Topic: testing Jerry's steel cone styli
- Replies: 21
- Views: 4299
Re: testing Jerry's steel cone styli
There will always be at discharge, but you harder than when cutting a groove, you can convert a 20 micron square times the pressure of the knife on this micro surface, times the surface of the disc, comes more than 100 tonnes on 12-inch plate
- Tue Jan 21, 2014 3:03 pm
- Forum: Experimenters' & Innovators' forum
- Topic: Simple Anti RIAA pre-filter
- Replies: 11
- Views: 1863
Re: Simple Anti RIAA pre-filter
This is a passive filter, introduces a very large loss in the audio track, you need to apply any much more efficient Including a silencer high frequency above 17kHz, for example, such as a processor active filter Neumann sab74b/vg easy to do, simply perfect!
- Tue Jan 21, 2014 3:02 pm
- Forum: Experimenters' & Innovators' forum
- Topic: Simple Anti RIAA pre-filter
- Replies: 11
- Views: 1863
Re: Simple Anti RIAA pre-filter
This is a passive filter, introduces a very large loss in the audio track, you need to apply any much more efficient Including a silencer high frequency above 17kHz, for example, such as the processor is active filtrNeumann sab74b/vg easy to zmajstrowania, almost perfect!
- Tue Jan 21, 2014 2:47 pm
- Forum: Classifieds & tip-offs
- Topic: SOLD : Neumann SX74 Cutterhead
- Replies: 14
- Views: 2848
Re: Neumann Sx74 cutterhead
I pay $ 4000 + shipping + 10% for eBay
- Tue Jan 21, 2014 2:45 pm
- Forum: Classifieds & tip-offs
- Topic: SOLD : Neumann SX74 Cutterhead
- Replies: 14
- Views: 2848
Re: Neumann Sx74 cutterhead
I'm sorry you very much, but I do not buy off ebay service
- Tue Jan 21, 2014 2:59 am
- Forum: Classifieds & tip-offs
- Topic: WTB - Broken cutterhead
- Replies: 28
- Views: 3553
Re: WTB - Broken cutterhead
so just read, but what is FB 30dB, what is the point of reference, a unit of Relative dB, 0 dB can be eg 0.7 V rms, it would mean that the feedback signal is 70 V RMS, it is not physically possible .... How much it means to Caruso, they are already CARUSO sell? If they only have one the art of being...
- Tue Jan 21, 2014 2:25 am
- Forum: Classifieds & tip-offs
- Topic: WTB - Broken cutterhead
- Replies: 28
- Views: 3553
Re: WTB - Broken cutterhead
Such things can only find in antique shops, flea markets, people do not even know what they have in the United States was most of these SX .. , So you can trafic, someone has it and can even purchase such for $ 50 because someone does not know what it is, etc, on the other hand it is always 100 time...
- Tue Jan 21, 2014 2:14 am
- Forum: Classifieds & tip-offs
- Topic: SOLD : Neumann SX74 Cutterhead
- Replies: 14
- Views: 2848
Re: Neumann Sx74 cutterhead
so deviated from the price? very well! but even if you'd just from 1k down, and showed one photo of it buys today, you have one photo? As her head I buy, where, who it repaired?
- Mon Jan 20, 2014 4:36 pm
- Forum: Circuits, schematics and manuals
- Topic: FLopen_midi, the flozki open source Midi remote for lathes
- Replies: 16
- Views: 8546
Re: FLopen_midi, the flozki open source Midi remote for lath
VMS70 beautiful machine!, Opcode, you can make a screenshot of the midi what you have in your computer?, I'm interested in
- Mon Jan 20, 2014 4:20 pm
- Forum: Secrets of the Lathe Trolls
- Topic: Worldwide names for record sizes? Inches? Centimeters?
- Replies: 2
- Views: 534
Re: Worldwide names for record sizes? Inches? Centimeters?
regarding vinyl in Europe urzywana still systemyu inch, 7-inch, 10-inch 12-inch vinyl disc, so will be the end of the world I think
- Mon Jan 20, 2014 4:07 pm
- Forum: Secrets of the Lathe Trolls
- Topic: Neumann Ms 52H shank removal
- Replies: 9
- Views: 1583
Re: Neumann Ms 52H shank removal
if it is used up or broken needle, take it heat the soldering up to 250 degrees Celsius and touch the broken end of the needle for a few seconds, then so take tweezers and gently turn anticlockwise and right and top, comes to 100%
- Mon Jan 20, 2014 3:54 pm
- Forum: Classifieds & tip-offs
- Topic: WTB - Broken cutterhead
- Replies: 28
- Views: 3553
Re: WTB - Broken cutterhead
for damaged heads so much you want to pay? $ 3000 is not an exaggeration? I think you should pay up to $ 1,000, and that's all you can repair costs 2,500 k, how much efficient? , Pay for efficient today $ 3500, please put on ebay, I click immediately
- Mon Jan 20, 2014 3:39 pm
- Forum: Secrets of the Lathe Trolls
- Topic: What is the current situation with the Caruso Cutterhead?
- Replies: 20
- Views: 2753
Re: What is the current situation with the Caruso Cutterhead
do you have a link? I do not see anything there?
- Mon Jan 20, 2014 3:28 pm
- Forum: Secrets of the Lathe Trolls
- Topic: What is the current situation with the Caruso Cutterhead?
- Replies: 20
- Views: 2753
Re: What is the current situation with the Caruso Cutterhead
maybe some technical parameters? anyone can find something more to say?
- Mon Jan 20, 2014 3:26 pm
- Forum: Secrets of the Lathe Trolls
- Topic: What is the current situation with the Caruso Cutterhead?
- Replies: 20
- Views: 2753
Re: What is the current situation with the Caruso Cutterhead
well, but how this head costs if anyone has this heads? I sold it for pennies vinylrecorder Souri, the head was on the tweeters, after 10 cuts head was burned, I bought speakers for $ 10 pasted and was just as badly with Recording, What they put toa heads Caruso? whether FB feedback and whether heli...
- Mon Jan 20, 2014 2:30 pm
- Forum: Secrets of the Lathe Trolls
- Topic: What is the current situation with the Caruso Cutterhead?
- Replies: 20
- Views: 2753
Re: What is the current situation with the Caruso Cutterhead
How much is this Carus?
- Mon Jan 20, 2014 2:09 pm
- Forum: Classifieds & tip-offs
- Topic: WTB - Broken cutterhead
- Replies: 28
- Views: 3553
Re: WTB - Broken cutterhead
Caruso is the head?
- Mon Jan 20, 2014 2:05 pm
- Forum: Classifieds & tip-offs
- Topic: WTB - Broken cutterhead
- Replies: 28
- Views: 3553
Re: WTB - Broken cutterhead
I asked Todd if it sells, does this head?
- Mon Jan 20, 2014 1:54 pm
- Forum: Experimenters' & Innovators' forum
- Topic: Simple Anti RIAA pre-filter
- Replies: 11
- Views: 1863
Re: Simple Anti RIAA pre-filter
it probably is not suitable, I think ...