Search found 564 matches
- Sat Sep 14, 2024 11:06 am
- Forum: Vinyl Mastering, Lacquer cutting, Pro's and others
- Topic: Laquer Cutting Bonanza & Metal Work, Was it?
- Replies: 4
- Views: 431
Re: Laquer Cutting Bonanza & Metal Work, Was it?
no one has made a professional cutting lathe, none that I am aware of any way Further we have not seen an increase in the number of cutting studios or cutting lathes being put into action If so it was kept quite as there was not much publicity unlike the opening of a pressing plant here there and e...
- Sat Aug 31, 2024 5:30 pm
- Forum: Secrets of the Lathe Trolls
- Topic: scully banding unit schematics
- Replies: 7
- Views: 934
Re: scully banding unit schematics
on another one it says :"to banding unit 10PRONG male"
there is somewhere more schematics..
there is somewhere more schematics..
- Sat Aug 31, 2024 5:15 pm
- Forum: Secrets of the Lathe Trolls
- Topic: scully banding unit schematics
- Replies: 7
- Views: 934
Re: scully banding unit schematics
not sure if its this one.i have all the schematics for units nr. 560 upwards. but maybe your box is from an older model.need a little more infos on the connectors.
- Fri Aug 16, 2024 10:30 am
- Forum: Experimenters' & Innovators' forum
- Topic: Cutting on tiny metal cylinders
- Replies: 5
- Views: 955
Re: Cutting on tiny metal cylinders
you should check the sonic properties of aluminium also
- Tue Aug 06, 2024 5:54 am
- Forum: Newbie Forum
- Topic: DMM onto tiny or unusual shapes
- Replies: 11
- Views: 2059
Re: DMM onto tiny or unusual shapes
hello did many strange and impossible formats. from tripple grooves , inside outs owhatever you can imagine. everything is possible. just time & money sometimes is a downer. this artist did really a declianntion what is possible weird 10" record on 33 and the double groove on 45rpm at 7" diameter st...
- Fri Jun 28, 2024 5:40 am
- Forum: Secrets of the Lathe Trolls
- Topic: Myshank Diamond Comparisons
- Replies: 9
- Views: 1961
Re: Myshank Diamond Comparisons
Sorry double post
- Fri Jun 28, 2024 5:39 am
- Forum: Secrets of the Lathe Trolls
- Topic: Myshank Diamond Comparisons
- Replies: 9
- Views: 1961
Re: Myshank Diamond Comparisons
I can not give a direct answer to the products you are referring. Technically there is no difference anymore between synthetic and natural.except to have a few boron atoms and a way better understanding of the direction of growing. From the ethical aspect we don’t even have to talk. if you check und...
- Tue May 28, 2024 3:49 pm
- Forum: Secrets of the Lathe Trolls
- Topic: Caruso parametric curve
- Replies: 23
- Views: 8130
Re: Caruso parametric curve
So you run Bryson in a cutting setup? Moving coil Feedback cutterhead like Neumann ? This is quite a different job to driving speakers… As a listening amp I see no problem .they sound very Nice and as I said I can only talk about very bad experience long time ago with 90ies generation.trying to run ...
- Wed May 15, 2024 3:43 am
- Forum: Circuits, schematics and manuals
- Topic: FLopen_midi, the flozki open source Midi remote for lathes
- Replies: 18
- Views: 12548
Re: FLopen_midi, the flozki open source Midi remote for lathes
haha.totally forgot that i linked it here. great there is even a little pcb since a very long time. kind of standard for pitch98/13/18 installations. but due to optocouplers its useable almost everywhere. https://www.flokason.ch/imgs/midi2lathe_nano_functions.jpg i think thats the code most use: htt...
- Sat May 04, 2024 5:24 pm
- Forum: Secrets of the Lathe Trolls
- Topic: Caruso parametric curve
- Replies: 23
- Views: 8130
Re: Caruso parametric curve
Bryston I can not recommend..the 2nd one on my negative list.
at least the ones mid 90-2000. They are super divas.. but maybe more recent ones are are a little more easy to handle
Not tried out since then..
at least the ones mid 90-2000. They are super divas.. but maybe more recent ones are are a little more easy to handle
Not tried out since then..
- Wed May 01, 2024 8:33 am
- Forum: Secrets of the Lathe Trolls
- Topic: Caruso parametric curve
- Replies: 23
- Views: 8130
Re: Caruso parametric curve
Pink noise might not be the perfect way to do that, but it can certainly help to build up a picture, (and it has much less high frequency content than white noise, so it puts less strain on the cutting head) just remember to adjust your spectrum analyzer so that pink=flat. this is all fine. i total...
- Sat Apr 27, 2024 6:30 am
- Forum: Secrets of the Lathe Trolls
- Topic: Caruso parametric curve
- Replies: 23
- Views: 8130
Re: Caruso parametric curve
I would go very slow.cut some stuff you know and where you have the master and a reference on vinyl. listen on a decent system you know.compare and and do slight adjustments.. the fab filter .pink noise is the wrong way to go. Technically yes .but soundwise very bad idea… You don’t have to dream. Ca...
- Tue Feb 06, 2024 4:31 am
- Forum: Secrets of the Lathe Trolls
- Topic: Neumann cutterhead mount on Caruso
- Replies: 9
- Views: 2259
Re: Neumann cutterhead mount on Caruso
the original target lathe of caruso head back in the day was not a neumann. more for simpler smaller lathes often with less space. so i made a 8mm bar not 10mm . but its hold by 3 standard M3 screws. so take a little longer screws and it does not matter if its 8 or 10mm bar. if you want a 18mm round...
- Tue Jan 09, 2024 5:53 am
- Forum: Plating and Pressing
- Topic: very thin pressings <120 gramm
- Replies: 1
- Views: 83958
very thin pressings <120 gramm
hello lathetrolls
someone asked me about possibility of very thin 1980 style maxi single pressings in the range 110-120 grams.
yes against any trend i know.
who can do that?
happy cutting f.
someone asked me about possibility of very thin 1980 style maxi single pressings in the range 110-120 grams.
yes against any trend i know.
who can do that?
happy cutting f.
- Sat Jan 06, 2024 5:48 am
- Forum: Classifieds & tip-offs
- Topic: WTB: Westrex 1700 Cutting Amp and 3D Cutterhead
- Replies: 4
- Views: 68598
Re: WTB: Westrex 1700 Cutting Amp and 3D Cutterhead
Len is your man if it comes to original westrex…no one knows this stuff better. If not successful I can offer a dialba head and vc200 amps.. sounds damn good and is very close to 1700 specs.. i have to look up W1700 rail to rail Voltage.but you will get louder cleaner cuts than with a 3D head… The o...
- Tue Jan 02, 2024 7:31 am
- Forum: Vinyl Mastering, Lacquer cutting, Pro's and others
- Topic: Agnew analog system
- Replies: 7
- Views: 45467
Re: Agnew analog system
i think its very easy to find out. this should maybe go to a general buyers guide for cutting equipment. just send in a few music samples and ask for a cut on the actual particular machine that you are looking to buy. any serious seller, will cut it and send it for reasonable amount of money. pay fo...
- Fri Dec 22, 2023 11:00 am
- Forum: Experimenters' & Innovators' forum
- Topic: Recommended DC motors for turntable
- Replies: 2
- Views: 4882
Re: Recommended DC motors for turntable
hello Mark
the premotec was just laying around... not the reference.
and it only works with belt driven TT's as they dont run stable on direct.
but if you go the belt way you find cheap some bldc with electronics for 30-50$ esy
happy cutting
f.
the premotec was just laying around... not the reference.
and it only works with belt driven TT's as they dont run stable on direct.
but if you go the belt way you find cheap some bldc with electronics for 30-50$ esy
happy cutting
f.
- Tue Oct 31, 2023 11:56 am
- Forum: Secrets of the Lathe Trolls
- Topic: TSM's Vinyl Pressing Plants list updated
- Replies: 5
- Views: 9183
Re: TSM's Vinyl Pressing Plants list updated
There is TZO in Leipzig as only independent manufacturer at the moment..hopefully more to come. Most factories do the blanks themselves.
- Mon Oct 30, 2023 8:04 am
- Forum: Secrets of the Lathe Trolls
- Topic: TSM's Vinyl Pressing Plants list updated
- Replies: 5
- Views: 9183
Re: TSM's Vinyl Pressing Plants list updated
hello Steve thanks for the update. a few additional infos poland: optical disc mastering. https://opticaldiscmastering.eu/ on the first all new built dmm lathe (flokason AM44 dmm lathe with ultracut amps) germany: -emil berliner is not yet in operation as far as i know. they have the lathe but i hav...
- Fri Oct 13, 2023 9:39 am
- Forum: Classifieds & tip-offs
- Topic: Audax mono head for sale
- Replies: 2
- Views: 21081
Audax mono head for sale
Make me a reasonable offer and it is yours
As is.coil ok movement ok
As is.coil ok movement ok