The Secret Society of Lathe Trolls

Hi Tyler

Are you using the same vacuum system for both VR's or an individual vac for both lathes?
For the swarf to bunch up like that, from the video looks like a poor suction issue
if your using individual vacs can you swap vacs and see if the issue remains?

Regards
Theo

Check the cutterhead wiring for continuity there could possibly be a loose wire on the right channel / check the male 3pin din connector / check the (R) female din socket Swap the speaker out connectors on the amp and if the left channel on the cutterhead intermittently drops out you know it’s the a...

This item has been sold

Hi All

I am Selling my T560, it's currently on eBay Item Number 112585839972
I am also throwing in a few extras, local Bidders Only

regards
Theo

Hi James

Looks really nice, great work!

I'm using a technics SP10mk2, with the additional
Precision plate from VR works well.

Yes very cool watched it last night with the fam really enjoyed it nice work guys

Thanks for clearing the air sat159
Could you please provide us a sound file sample of the motor noise Issue your referring too since David's issue is related to a ground loop problem
This would help us vinyl recorder uses.

Hi David

Nice Job on fault finding the motor noise issue.

Happy cutting

Theo

Hi Mark, Soldering a capacitor will definatly fix the motor noise issue but I would not bother with this as the motor is incased in a thick aluminium tube and covered with silicon with little access. Also David could accidently damage something. I did too replace the German power plugs to Aussie plu...

Hi David34

Mark is correct, i have the same issue with my VR so i placed a (Hum Destroyer) Behringher HD400 Between the last RCA Cable that Outputs to the Amplifier, Whine noise was gone after a silent cut was done.


Theo

Hey Sat159

I will take it if its still available

rgds
Theo

Happy new year to all
All the best for 2014

My prayers and thoughts are with you all during this horrible time. Stay strong brother

Transco 350AL aluminum shank cutting stylus for WESTREX cutting heads.



http://www.ebay.com/itm/WESTREX-CUTTERHEAD-STYLUS-SCULLY-LATHE-MASTERING-DISK-LACQUER-CUTTING-TRANSCO-/151008018967?pt=US_Other_Pro_Audio&hash=item2328c78217

Vintage Radiotone Record Transcription Turntable Record Cutter on ebay


http://www.ebay.com/itm/Vintage-Radiotone-Record-Transcription-Turntable-Record-Cutter-Model-D12-RARE-/281066657665?pt=Vintage_Electronics_R2&hash=item4170e0d781

its missing the cutting-head, maybe a good project for someone?



http://www.ebay.com/itm/VINTAGE-PRESTO-K10-K-10-RECORD-CUTTER-/230891342488?pt=Vintage_Electronics_R2&hash=item35c2324a98

http://www.ebay.com/itm/Grampian-head-record-disc-vinyl-cutter-cutting-mastering-lathe-presto-neumann-/290787584402?pt=US_Vintage_Pro_Audio_Equipment&hash=item43b44a6992

Grampian Cutterhead for sale ebay