90-2000 is first generation, very old and not the same.
ST is 2000 onwards, SST around 10 years later, now on the SST2. All have major improvements on every update.
Search found 55 matches
- Sat May 04, 2024 5:31 pm
- Forum: Secrets of the Lathe Trolls
- Topic: Caruso parametric curve
- Replies: 15
- Views: 1105
- Sat May 04, 2024 5:13 pm
- Forum: Secrets of the Lathe Trolls
- Topic: Caruso parametric curve
- Replies: 15
- Views: 1105
Re: Caruso parametric curve
On the subject of power amps, I have tried more than I can remember and so far the Bryston 4B ST and the 4B SST if you have the budget are the ones for me. The SST has the edge, goes a bit higher to 100khz and bit more power at 500 watts at 4 ohm where the ST has 400 watts. The ST seems to sell for ...
- Mon Apr 22, 2024 9:05 am
- Forum: Classifieds & tip-offs
- Topic: Scribing Platforms £80.00 GBP
- Replies: 2
- Views: 535
Re: Scribing Platforms £80.00 GBP
Looks great! Beautiful work, beautiful material. Price is also fair. I already have something like this, but if I didn't, I would buy it. I have one question: Does it rest on the front of the turntable or does it hang completely from the center pivot? And if it rests on the platter, at what distanc...
- Sun Apr 21, 2024 5:32 am
- Forum: Classifieds & tip-offs
- Topic: Scribing Platforms £80.00 GBP
- Replies: 2
- Views: 535
Scribing Platforms £80.00 GBP
Scribing platforms now available
£80.00 GBP each plus post.
£80.00 GBP each plus post.
- Mon Apr 08, 2024 3:33 am
- Forum: Vinyl Mastering, Lacquer cutting, Pro's and others
- Topic: The 'Nautilus' cutterhead..
- Replies: 3
- Views: 910
- Wed Apr 03, 2024 1:15 pm
- Forum: Classifieds & tip-offs
- Topic: Looking to buy a mono cutterhead (also, how much should I expect to pay?)
- Replies: 9
- Views: 1031
Re: Looking to buy a mono cutterhead (also, how much should I expect to pay?)
Have a look here, new to the market, loud plug and play stereo heads compatible with Prestos and small lathes. https://www.instagram.com/p/C5G4WfRsbLh/?igsh=MXg3dWZ1ZDdzaHB6dg== Not to go too far off topic, but ive tried to find info on these heads. Is there a webpage? There's a facebook page where...
- Wed Apr 03, 2024 4:16 am
- Forum: Classifieds & tip-offs
- Topic: Looking to buy a mono cutterhead (also, how much should I expect to pay?)
- Replies: 9
- Views: 1031
Re: Looking to buy a mono cutterhead (also, how much should I expect to pay?)
Have a look here, new to the market, loud plug and play stereo heads compatible with Prestos and small lathes.
https://www.instagram.com/p/C5G4WfRsbLh/?igsh=MXg3dWZ1ZDdzaHB6dg==
https://www.instagram.com/p/C5G4WfRsbLh/?igsh=MXg3dWZ1ZDdzaHB6dg==
- Tue Apr 02, 2024 5:35 pm
- Forum: Classifieds & tip-offs
- Topic: Looking to buy a mono cutterhead (also, how much should I expect to pay?)
- Replies: 9
- Views: 1031
Re: Looking to buy a mono cutterhead (also, how much should I expect to pay?)
Why not a stereo head? What’s your lathe and budget?
- Fri Mar 01, 2024 5:18 pm
- Forum: Secrets of the Lathe Trolls
- Topic: Distortion even at low levels.......
- Replies: 8
- Views: 1346
Re: Distortion even at low levels.......
Post a clip, sounds like mechanical breakdown of one of the drivers from being pushed too hard for long periods.
Try cutting with one driver at a time momentarily.
Try cutting with one driver at a time momentarily.
- Wed Feb 07, 2024 5:19 pm
- Forum: Caveat Emptor
- Topic: SCAM: Vinyl Record Cutter T560 2014 Silver
- Replies: 10
- Views: 1578
- Tue Feb 06, 2024 2:42 am
- Forum: Secrets of the Lathe Trolls
- Topic: Neumann cutterhead mount on Caruso
- Replies: 9
- Views: 1232
Re: Neumann cutterhead mount on Caruso
Cool, not sure why your Caruso has a thinner strip but good job. You reusing the circular part of my original mount?
- Sat Feb 03, 2024 5:44 pm
- Forum: Secrets of the Lathe Trolls
- Topic: Neumann cutterhead mount on Caruso
- Replies: 9
- Views: 1232
Re: Neumann cutterhead mount on Caruso
You got the Neumann mount from me.
Stick a photo up of the back of the Caruso.
There should be a thin strip of metal for the mount to bite into using the 3 tiny grub screws on the side of the mount.
Stick a photo up of the back of the Caruso.
There should be a thin strip of metal for the mount to bite into using the 3 tiny grub screws on the side of the mount.
- Sun Jan 14, 2024 3:23 pm
- Forum: Secrets of the Lathe Trolls
- Topic: Cutterhead Problem
- Replies: 1
- Views: 34518
Re: Cutterhead Problem
Very common on Souri heads! That side will progressively get worse, start blowing fuses and eventually die. Same thing happened to me 10 years ago (and I’ve also rebuilt many since then that had the same issue) which ultimately led me to begin my 10 year journey on perfecting the building of dynamic...
- Mon Jan 08, 2024 5:53 pm
- Forum: Vinyl Mastering, Lacquer cutting, Pro's and others
- Topic: Groove jumping on VMS70
- Replies: 13
- Views: 88679
Re: Groove jumping on VMS70
Open the cover, remove metal clip and unscrew the nut under the lever then you can pull it out. You need to clean the halfnut every now and then and clean leadscrew thank you - i got it out and it looks a bit drenched from what i can tell IMG_20230123_161402.jpg does anyone sell replacement halfnut...
- Wed Jan 03, 2024 4:13 am
- Forum: Classifieds & tip-offs
- Topic: WTB: Westrex 1700 Cutting Amp and 3D Cutterhead
- Replies: 4
- Views: 68080
Re: WTB: Westrex 1700 Cutting Amp and 3D Cutterhead
I just replied to your FB post
What do you plan on cutting?
I have affordable Stereo Cutter heads that cut loud and sound very nice for dubs!
https://www.dropbox.com/scl/fo/mknzzrbadqpee18sbu4fu/h?rlkey=kpd0xq849xbnkmakeop1porb0&dl=0
What do you plan on cutting?
I have affordable Stereo Cutter heads that cut loud and sound very nice for dubs!
https://www.dropbox.com/scl/fo/mknzzrbadqpee18sbu4fu/h?rlkey=kpd0xq849xbnkmakeop1porb0&dl=0
- Mon Dec 18, 2023 5:35 pm
- Forum: Secrets of the Lathe Trolls
- Topic: New JAES paper on tracing distortions
- Replies: 32
- Views: 209931
Re: New JAES paper on tracing distortions
Yes here in the UK the underground dance music scene commonly called 12” laquers “acetates” as an alternative to Dub Plates!
- Sun Dec 17, 2023 4:53 pm
- Forum: Secrets of the Lathe Trolls
- Topic: Stereo Cutter Heads Available - Presto - Vinyl Recorder
- Replies: 0
- Views: 44112
Stereo Cutter Heads Available - Presto - Vinyl Recorder
Some exciting news for Presto or small desktop lathe users. Also compatible with Vinyl Recorder. I have developed and just finished a Dynamic Stereo Cutter Head only 63mm wide that is capable of cutting nice clean loud stereo cuts! Uses a Vinyl Recorder 340 Stylus. First tests only made a few hours ...
- Sun Dec 17, 2023 1:24 pm
- Forum: Classifieds & tip-offs
- Topic: Stereo Lathe Equipment for sale (Vinylium, Vinyl Recorder etc.)
- Replies: 23
- Views: 66585
Re: Stereo Lathe Equipment for sale (Vinylium, Vinyl Recorder etc.)
What’s your location?
Interested in the SP10
Interested in the SP10
- Mon Dec 11, 2023 3:58 pm
- Forum: Experimenters' & Innovators' forum
- Topic: Stereo Cutter Heads Available - Presto - Vinyl Recorder
- Replies: 0
- Views: 46063
Stereo Cutter Heads Available - Presto - Vinyl Recorder
Some exciting news for Presto or small desktop lathe users. Also compatible with Vinyl Recorder. I have developed and just finished a Dynamic Stereo Cutter Head only 63mm wide that is capable of cutting nice clean loud stereo cuts! Uses a Vinyl Recorder 340 Stylus. First tests only made a few hours ...
- Sat Nov 18, 2023 11:53 am
- Forum: Classifieds & tip-offs
- Topic: Two more Stereo Cutter Heads £300 each
- Replies: 4
- Views: 7983
Re: Two more Stereo Cutter Heads £300 each
Both sold!