The Secret Society of Lathe Trolls

Dear Record-Pressing-People, After almost 20 years of pressing vinyl records, we have stopped doing this and now we have focussed on making vinyl record stampers. We can offer: -Stamper: If you only want to have a stamper/father it costs you 90 EUR each side -Mother: if you want a mother in addition...

The Machine is sold. Cheers. Bieber

HI. I am Looking for a punching machine that forms the Stamper Center Hole. Thanks for your help. Cheers. Bieber

For Beginners: Fully Working vinyl record pressing setup I am selling my manual pressing machine. The machine comes with a TTT manual Extruder (Diskomat) and the trimmer. The setup is in working condition and can be seen running. The setup contains: -Werner Pfleiderer manual pressing machine (the sa...

Hi There.

I am looking for a center hole punching machine for stampers.

If you have one for sale, just write me a p.m.

Thanks!

Cheers,

Bieber

I could not find a used one, so I ordered a new one here: Wilh. Schäfer GmbH Steinmühlstr.8 61352 Bad Homburg Tel: 06172/41235 Fax: 06172/458560 E-Mail: h.schaefer@wilh-schaefer-gmbh.de It was not cheap. Almost 3000 EUR. But it has a steel inlay. This company makes spareparts for Toolex and TTT and ...

HI.

I am looking for a (new) unloading arm for Toolex 1202. Or, I would like to buy the CAD file of it if anybody already made it.

Thanks for your help!

Cheers.

Bieber

HI! The temperature returned to be normal. Reason for the increased temperature was a piece of metal in the screw. It must have been in the barrel for months. I heard it, but I could not specify the noise I have heard. Now I know what it was... You can also see a little damage of it on top of the sc...

Hi Chris,

thanks for your help. Well I will try to slow the motor down.

But as long as it is like it is: Do you think it is bad for the screw to have it like I have it now? And do you think it is bad for the records?

Cheers.

BIeber

HI Andi, yes, I must be really desperate if I post here again... Thanks, well yes, this machine can solve all of my problems. And it works with low voltage. Great. Thanks for your answer. I guess it will be hard to find information about other screws but it is a start. I will work on this. The extru...

HI! I have I question, maybe you can help me: I am pressing 180gr LPs on my Toolex 1202. The temperature setting of the extruder is: 115, 125, 135. When I am pressing some minutes, the temperature is rising to 130, 135, 140. The 3 zones are cooling all the time, but due to the massive output, the ex...

Thanks for your reply! Well, yes, I want to press 12" and trimm them down to 10". I tried it with my 2 trimmers, but it does not work. I have one very godd trimmer, but only for 12" and 7". But in the meantime I think it will be the easiest to make a table for 10", too. Do you have a picture of your...

I am looking for a 10" vinyl record trimmer. Everything would be fine, as long as it really works.

Cheers,

Bieber

HI.

I am looking for a new pair of Toolex 7" moulds.

Cheers.

Bieber

HI Guys,

I have to ask you for a favour:

Could you please send me a pic of the TA 1202 Control panel where I can read all letters? Reason is: on my panel all the letters have disappeared.

Thanks!

Regards,

Bieber

Hi. I am selling my old cutting equipment on ebay: DDR Stereosichtgerät / Goniometer http://www.ebay.de/itm/181066884719?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 Studer Peakmeter 4 x Stereo Pegelmesser http://www.ebay.de/itm/181066890590?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649...

HI. When I sold it, it worked perfect. The meter of the pitch is really crap in it´s digital way. The old man who changed it (and from who I bought this lathe) did not cut much. I think he made this just for fun. But the digital meters for heating and tension of the depht is quite good. Anyway: I so...

well, i do not know anything about international steam, but my certuss boiler is the only machine here that works for hours without any problems. This machine must be a man, while i am shure that my old ttt press was a lady.... ;-) but i am pressing lps right now. boring. One minute each record. thi...

WoW! 15 sec! That´s really fast. I have exactly 30 sec. LP is around 60 sec.

Water is 10 Bars open and steam is 9 bars open.

I was working for 3 years now to get those preassures. Not perfect, but I am working on it.

Hey! Thanks for the flowers! Yes, the light curtain was the most expensive part. 2000 EUR. But it is programmable and a minimum of security should be worth the money... Yes, the flash in the video is too much. Normally I do not have so much flash. I guess this was in the beginning of the pressing. I...